Mealtime Partners, Inc.


Specializing in Assistive Dining and Drinking Equipment

 

MtP Part No. 4975

Wheelchair Clamp Attachment Holder - $54.95

Attachment Holder

The Attachment Holder can be attached to either side of the Wheelchair Clamp using the two screws and hex wrench that are provided with it. It can accommodate tubing ranging from 11/16 to 7/8 inches (17 to 22 mm). It allows the Wheelchair Clamp to hold a second Flex Arm or Flexible Conduit. Thus two different controls, or a drinking tube and a control can be mounted on a wheelchair at the same time. The Attachment Holder can be oriented in the same direction as the Attachment Holder that is an integral part of the Wheelchair Clamp, or can be oriented at a 90o angle from it on both sides of the Wheelchair Clamp. Additionally, because the Attachment Holder can be mounted to either side of the Wheelchair Clamp it facilitates mounting various controls, drinking systems, etc., to meet the specific needs of each individual. The picture below illustrates the versatility of the wheelchair clamp when combined with an Attachment Holder. Also, if desired, two Attachment Holders can be attached to the Wheelchair Clamp to accommodate a third additional piece of equipment.

Wheelchair Clamps with Attachment Holders
Two Wheelchair Clamps with Attachment Holders

The parts that come with the Wheelchair Clamp Attachment Holder are pictured below.

 

Attachment Holder Parts

Wheelchair Clamp Attachment Holder and Associated Parts

 

Attachment Holder
Wheelchair Clamp Attachment Holder Attached to the Wheelchair Clamp

 

PART NO. DESCRIPTION PRICE S & H PURCHASE
4975 Wheelchair Clamp Attachment Holder $54.95 $15.00

 

This page last updated 12-21-2017